Avaya G430 - Page 89

• cdr-file. A Call Detail Recording (CDR) file
• dhcp-binding. The DHCP binding file
Software and firmware management commands
For more information about these commands, see the Avaya Branch Gateway G430 CLI
Reference.
Command Description
copy file ftp Upload a specific file from the Branch Gateway to an FTP
server
copy file scp Upload a specific file from the Branch Gateway to an SCP
server
copy file tftp Upload a specific file from the Branch Gateway to a TFTP
server
copy file usb Upload a specific file from the Branch Gateway to the USB
mass storage device
copy ftp EW_archive Upgrade the Java applet for Branch Gateway software from
an FTP server
copy ftp module Upgrade the firmware on a media module from an FTP
server by entering this command followed by the module
number of the module you want to upgrade
copy ftp SW_imageA Upgrade the Branch Gateway firmware into Bank A from an
FTP server
copy ftp SW_imageB Upgrade the Branch Gateway firmware into Bank B from an
FTP server
copy tftp EW_archive Upgrade the Java applet for Avaya Gxxx Manager software
from a TFTP server
copy tftp module Upgrade the firmware on a media module from a TFTP
server
copy tftp SW_imageA Upgrade the Branch Gateway firmware into Bank A from a
TFTP server
copy tftp SW_imageB Upgrade the Branch Gateway firmware into Bank B from a
TFTP server
copy usb
announcement-file
Upgrade announcements files from the USB mass storage
device
copy usb auth-file Upgrade the authorization file from the USB mass storage
device
copy usb EW_archive Upgrade the Java applet for Avaya Gxxx Manager software
from the USB mass storage device
Basic device configuration
Administering Avaya G430 Branch Gateway October 2013 89