Avaya G430 - Page 92

3. Enter backup config usb usbdevice0 backup-name, where backup-
name is the backup directory path and file name you are creating on the USB mass-
storage device.
A backup directory is created on the USB mass-storage device.
4. Before unplugging the USB mass-storage device, use the safe-removal usb
command to safely remove the USB mass-storage device.
5. You can use the show backup status command to display information regarding
the status of a backup of the Branch Gatewa configuration to a USB mass-storage
device.
Sample backup directory after backup
After the backup, a backup directory is created on the USB mass-storage device with the
following sample structure and file types:
Root directory Sub-directory Files Comments
backup-25-
Nov-2005
Backup directory name
readme.txt File with backup
information
startup_config.cfg Configuration file
audio.bin Customer-specific
VoIP parameters
auth-file.cfg Authentication file
IPPHONE IP phone scripts and
images directory
46xxupgrade.scr
46xxsettings.txt
MM Media modules file
directory
GWANNC Branch Gateway
announcements and
music-on-hold file
GeorgeAnnouncement.w
av
GeorgiaAnnouncement
.wav
Basic device configuration
92 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com