Related links
Ringer Controls on page 140
Ringer Volume
You can adjust the ringer volume while the phone is idle or while it is ringing.
•
You can set the ring volume to zero, the phone displays a icon but still provides visual
alerting.
Procedure
1. With the phone idle or ringing, use the + plus and – minus keys to adjust the volume.
2. Once you stop adjusting the volume, the display returns to normal after a few seconds.
Related links
Ringer Controls on page 140
Internal Auto-Answer
You can select to have internal calls automatically connected if you are not already on a call. The
call is connected after the phone gives a brief tone, using either the phone's speaker or the
headset as set by the phone's audio path setting.
This function can be assigned to a feature button configured with the Auto Answer action. The
button lamp indicates when 'internal auto answer' is on. See Programmable Feature Buttons on
page 132.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the
PHONE key and then press Features.
2. Use cursor keys to select Call Settings.
3. Use the up/down cursor keys to selectt Internal Auto-Answer.
4. To change the setting, press the Change.
Related links
Ringer Controls on page 140
Ringer Controls
April 2020 J100 Series Phone User Guide 142
Comments on this document? infodev@avaya.com
To Next Page
Loading...
