Avaya J159 - Chapter 15: Headset Operation; Using a Heaset

Chapter 15: Headset Operation
Your phone has a headset socket. This is suitable for the connection of phone headsets that
connect via a HIS headset cable.
• The J159 and J179 also support Bluetooth headsets if the optional wireless module is installed
in the phone.
• If there are no currently connected call, a call answered or made by pressing an appearance
button is connected either handsfree or through the headset according to the phone's audio
path setting. See
Default Handsfree Audio Path on page 89. The same applies to dialing a
new call.
• If there is already a connected call to which you are talking through the headset, answering
another call by pressing the appearance button answers that call using the headset.
Related links
Using a Heaset on page 85
Headset Selection on page 86
Headset Caller Volume on page 86
Headset Microphone Volume on page 87
Headset Profile on page 87
Automatic Gain Control on page 88
Default Handsfree Audio Path on page 89
Using Bluetooth Headsets on page 89
Headset Alert Sounds on page 91
Using a Heaset
•
To answer a call using a headset: Press the
HEADSET button.
•
To end a headset call: Press the HEADSET button. If the other party ends the call, the
HEADSET button remains active. Press the button to end the headset usage.
• To switch from the headset to the handset: To switch from the headset to the handset,
simply lift the handset.
• To switch to handsfree from the headset: To switch to handsfree from the headset, press
the
HEADSET button. Replace the handset.
April 2020 J100 Series Phone User Guide 85
Comments on this document? infodev@avaya.com