Procedure
Use the up and down cursor keys to select which call appearance is highlighted. This can be done
without affecting any currently connected or held calls.
• The currently highlighted button is shown by a white border around the button label.
• The soft keys at the bottom of the display automatically change to reflect actions that can be
performed on the call, if any, associated with the currently highlighted button.
Related links
Answering Calls on page 37
Using Call Pickup
Pickup is used to answer a call ringing elsewhere on the phone system.
Note:
• Your system administrator can configure whether you can access this menu.
• This menu is not supported on the J139.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the PHONE key and then press Features.
2. Use the cursor keys to select Pickup.
• To answer any ringing call, press the Any soft key.
• To answer a call ringing against a particular target, dial the target's number. Alternatively,
press the Dir soft key to select the target from the directory.
3. The menu then depends on the type of number entered:
• User Number
- To answer a call ringing against the user, press the Pickup soft key.
- To return to entering a number, press the Clear key.
• Hunt Group Number
- To answer a call ringing against the members of the group, press the Members soft
key. The call does not have to be a call to the hunt group.
- To answer a call ringing for the hunt group, press the Group soft key.
- To return to entering a number, press the Clear key.
Related links
Answering Calls on page 37
Using Call Pickup
April 2020 J100 Series Phone User Guide 41
Comments on this document? infodev@avaya.com
To Next Page
Loading...
