Avaya J159 User Manual

Auto Display Waiting Call
By default, when you are connected on a call, the phone shows details of that call and soft key
actions you can perform for that call. In order to see details of a waiting call, you need to scroll the
display using the up and down cursor buttons.
You can opt to have the phone automatically show details of a waiting call when one alerts the
phone and soft key actions that you can perform on the waiting call. If you use the scroll keys to
return the display focus to the currently connected call, the focus automatically returns to the
waiting call after a few seconds.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the
PHONE key and then press Features.
2. Use cursor keys to select Call Settings.
3. Use the up and down cursor keys to highlight Auto Display Waiting Call.
4. Press the Change button to select On or Off.
5. Press Save.
Related links
Display Controls on page 143
Inactivity Timer (Auto-Return)
You can set a timer to return the phone to its normal call display after a set period of phone
inactivity.
Note that the time is not applied to the
and Visual Voice menus.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the PHONE key and then press Features.
2. Use the cursor keys to select Phone User.
3. Use the cursor keys to select Phone Screen Settings.
4. Use the up and down cursor keys to highlight Auto Return.
5. Press the Change soft key to change the setting or use the left or right cursor keys.
• Disabled - Do not use the inactivity timer.
• 30/60 - Apply the inactivity timer after the selected number of seconds.
6. Press Save.
Auto Display Waiting Call
April 2020 J100 Series Phone User Guide 147
Comments on this document? infodev@avaya.com

Avaya J159 Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
RJ-9 ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module support	No
Ethernet LAN (RJ-45) ports	-
Number of handles included	- pc(s)
Backlight color	Red/Green
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
Keypad number of keys	48
Number of programmable keys	4
Lines quantity	- lines
Phonebook capacity	- entries
Voice codecs	G.711, G.722, G.726, G.729, G.729A, G.729B, OPUS
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
AC adapter input voltage	5 V
Harmonized System (HS) code	85171800