Avaya J159 User Manual

Transferring a Call to Voicemail
When set to visual voice mode, the MESSAGE key can be used to transfer your current call to
the voicemail mailbox of another user or group.
Procedure
1. With the call connected, press the MESSAGE key. You are still connected to the call
and can continue talking.
2. Dial the extension number of the user or group to which you want to transfer the call.
3. When the number matches a user or group, their name is displayed.
• To transfer the call to the user or group's mailbox, press Select. The caller hears a few
seconds of ringing and then the mailbox greeting.
• To cancel the transfer, press Cancel.
Related links
Transferring Calls on page 73
Transferring a Held Call
There are various call transfer scenarios to consider:
• Note: It is also possible to transfer a held call by starting a conference and then dropping
yourself from that conference. However, if you are the only internal user in the conference,
depending on your telephone system's configuration, dropping yourself might end the
conference.
Procedure
1. Transfer to a Held Call: If you have multiple calls on hold and you want to transfer a
connected call to one of the held calls:
a. Press the Transfer soft key and use the up and down cursor keys to highlight the
desired call appearance.
b. When you are satisfied, press Complete to transfer the call while the other held
call(s) remain on hold.
2. Transfer to a New Call: If you have calls on hold but you want to connect your current call
with a new destination:
• Press the Transfer soft key and enter the destination manually using the numerical
keypad and press Complete.
• Alternatively, press Dir to select a destination from the directory or use the Redial
option, if applicable.
Transferring Calls
April 2020 J100 Series Phone User Guide 74
Comments on this document? infodev@avaya.com

Avaya J159 Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
RJ-9 ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module support	No
Ethernet LAN (RJ-45) ports	-
Number of handles included	- pc(s)
Backlight color	Red/Green
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
Keypad number of keys	48
Number of programmable keys	4
Lines quantity	- lines
Phonebook capacity	- entries
Voice codecs	G.711, G.722, G.726, G.729, G.729A, G.729B, OPUS
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
AC adapter input voltage	5 V
Harmonized System (HS) code	85171800