Printing 6-1
PRINTING
This chapter describes how to
♦ download files to the printer
♦ define the batch header, batch control, and batch data files
♦ create batch files.
♦ The printer accepts files in MPCLII, MLI, or XML format.
♦ Refer to the keyboard’s Operating Instructions for offline data entry and more printing
information.
Note: Do not enter more than 100 characters in offline mode.
Turn on the printer and make sure it is ready to receive data before downloading files. See
“Downloading Methods
” for information on ways to download.
When downloading, send packets in this order:
1. Memory configuration packet (M)
2. Configuration packets (A-X)
3. Any of the following:
♦ Check digit packets (see Chapter 4)
♦ Format packets (see Chapter 3)
♦ Graphic packets (see Chapter 5)
4. Batch data (see “Defining the Batch Header
”)
To Next Page
Loading...
