Diagnostics & Errors 8-17
Error Description
Code
856 Invalid quit command. The script is missing the quit command {Q space}.
857 Illegal command in the script. The script may include commands that have been
removed from the ADK2 scripting language.
858 Check sum error. Each packet has a four-digit checksum at the beginning of the packet.
Recompile the script.
859 Script download buffer overflow. The image buffer is used as the SCRATCH buffer.
Increase the size of the image buffer.
860 Error opening a font file on the print engine memory expansion option.
861 Error writing to a file on the print engine memory expansion option.
862 Invalid condition for the print engine memory expansion option.
Hard Printer Failure Errors
Errors numbered 930-940 are errors that may occur during the loading of flash memory. Errors
numbered 950-999 may indicate a circuit board failure. These errors are hard printer failures.
Call Technical Support if errors numbered 900- 938 are received.
Error Description
Code
900 RAM test failure.
901 ROM/EPROM checksum failure.
902 Software timer failure.
903 Software interrupt failure.
904 No memory for native layer.
905 Illegal interrupt.
906 Non-maskable interrupt. Check format packet for font clear or format clear packets.
907 Low RAM error.
908 Non Volatile RAM checksum failure.
909 NVRAM reset.
910 Warm restart.
911 Version string mismatch.
930 Flash erase error.
931 Flash write error.
932 RAM write error.
933 Parity error.
934 Framing error.
935 Buffer overrun.
936 Invalid record type.
937 Invalid hex data.
938 Invalid checksum.
939 Invalid record count.
940 Invalid flash address.
To Next Page
Loading...
