5-2 Packet Reference Manual
Designing Bitmapped Images
After determining the encoding method to use, map out the graphic
image.
Note: The mapped image must be an upside down mirror image of
the final result.
Special Considerations
Solid black print cannot exceed 30% of any given square inch of the
supply. If the black print exceeds this limit, you may lose data or damage the printhead.
In the first label, the large “M” logo and thick black line exceed the allowed black to white print
ratio. In the second label, the large “M” logo does not exceed the black to white print ratio.
limit
limit
exceed
exceed
To Next Page
Loading...
