A-14 Packet Reference Manual
Sample Data Entry Format Packet (UPCA Bar Code)
This packet uses Option 5 (Data Entry Sources) and Option 20 (Data Entry Prompts). After the
printer receives the format packet, the operator can go into Batch Entry Mode at the printer and
enter the batch data.
{F,1,A,R,E,300,200,"TEXTILES" |
T,1,10,V,250,50,0,1,1,1,B,C,0,0,0 |
R,20,"PART NUMBER:" |
R,5,K |
B,2,12,V,150,40,1,2,80,7,L,0 |
R,20,"UPC NUMBER:" |
R,5,K |
D,3,20 |
R,20,"FIBER#1:" |
R,5,K |
D,4,3 |
R,20,"PERCENTAGE:" |
R,5,K |
T,5,30,V,80,10,0,1,1,1,B,L,0,0,0 |
R,1," % " |
R,4,3,1,20,5,1 |
R,4,4,1,3,1,1 |
R,5,N | D,6,20 |
R,20,"FIBER #2:" |
R,5,K |
D,7,3 |
R,20,"PERCENTAGE:" |
R,5,K |
T,8,30,V,65,10,0,1,1,1,B,L,0,0,0 |
R,1," % " |
R,4,6,1,20,5,1 |
R,4,7,1,3,1,1 |
R,5,N |
C,30,10,0,1,1,1,B,L,0,0,"MADE IN USA",0 |
L,S,110,30,110,150,10," " |
Q,240,30,270,150,3," " | }
Depending on the operator-entered batch data, a label similar to this one prints.
To Next Page
Loading...
