Avery Dennison ADTP1 - Bitmap Font Information

B-6 Packet Reference Manual
96 97 98 99 100 101 102 103
Dry clean, No
Trichloro-
ethylene
Dry clean,
Petroleum
Solvent Only
Dry clean,
Any Solvent,
Short Cycle
Dry clean, No
Trichloro-
ethylene,
Short Cycle
Dry clean,
Petroleum
Solvent Only,
Short Cycle
Dry clean,
Any Solvent,
Reduced
Moisture
Dry clean, No
Trichloro-
ethylene,
Reduced
Moisture
Dry clean,
Petroleum
Solvent Only,
Reduced
Moisture
104
105
106
107
108
109
Dry clean,
Any Solvent,
Low Heat
Dry clean, No
Trichloro
ethylene,
Low Heat
Dry clean,
Petroleum
Solvent Only,
Low Heat
Dry clean,
Any Solvent,
No Steam
Dry clean, No
Trichloro
ethylene, No
Steam
Dry clean,
Petroleum
Solvent Only,
No Steam
Use the tilde sequences shown in this table to produce the desired character on tags/labels.
{F,1,A,R,E,200,200,"Font72" |
T,1,10,V,25,25,0,72,2,2,B,L,0,0|
T,2,10,V,65,65,0,72,1,1,B,L,0,0|}
{B,1,N,1|
1,"~042 ~067"|
2,"~080 ~087"|}
Bitmap Font Information
Our bitmap fonts are either monospaced (each character occupies the same amount of space) or
proportional (each character is a different width). Use monospaced fonts for price fields and data
to list in a column. With proportionally spaced fonts, more characters may be placed per line.
Experiment with these fonts and adjust field measurements as necessary. The bitmapped fonts
(either monospaced or proportional) appear jagged when magnified. The magnification range is 1
to 7.
Use the MONARCH® MPCL™ Toolbox (Font Utility), available on our Web site, to convert a
bitmap font to Hex or Run-Length encoding for the printer. Select the point size and characters
to print. Bitmap fonts may image faster than a TrueType font, but they are limited to the
downloaded point size and characters.