Defining Fields 3-29
Q6. thickness Using the chart below for reference, write the desired line
thickness (1 to 99) in box Q6. 2 is the default. Boxes fill inward,
so make sure boxes do not overwrite other fields. Measured in
dots.
Q7. “pattern” Line pattern. Enter "".
Example Q,240,30,270,150,3,"" |
Defines a box field starting at row 240, column 30. It ends at row 270, column 150. It has a
thickness of 3 dots.
Defining Verifier Fields
The verifier field in a format references the verifier configuration packet ID to use for this
particular format. Every format can have a specific verifier configuration packet. See “
Defining a
Verifier Configuration Packet,” in Chapter 2 for more information.
If a particular verifier configuration packet is not specified, the last sent verifier configuration
packet is used.
Note: Include the verifier field after the format header in the format packet.
Syntax V,vfrID |
V1. V Verifier Field.
V2. vfrID Unique number from 1 to 999 to identify the verifier configuration
packet to use with this format.
Example {F,25,A,R,M,508,508,"FMT-25" |
V,3 |
B,1,12,F,110,115,1,2,120,5,L,0 |}
Specifies verifier configuration packet #3 starting with format 25 until another verifier
configuration packet is specified.
To Next Page
Loading...
