Fonts B-1
FONTS
Our printers support two types of fonts: Bitmapped (traditional printer fonts such as
Standard and Reduced) and Scalable/TrueType® (Font 50). This appendix gives a brief overview
of each type of font and how the printer interprets fonts. It also shows examples of the printer’s
installed fonts.
Number
Font Size and
Type of
# of Dots Between
1 Standard Monospaced 3 (203 dpi) 5 (300 dpi)
2 Reduced Monospaced 1 (203 dpi) 2 (300 dpi)
3 Bold Monospaced 3 (203 dpi) 5 (300 dpi)
4 OCRA-like Monospaced 3 (203 dpi) 5 (300 dpi)
5 HR1 – only for numeric data Monospaced 2 (203 dpi) 3 (300 dpi)
6 HR2 – only for numeric data Monospaced 1 (203 dpi) 2 (300 dpi)
10*
CG Triumvirate™ Typeface Bold
(9pt. at 203 dpi or 8 pt. at 300 dpi)
Proportional Varies with each letter
11* 6 pt. CG Triumvirate™ Typeface Proportional Varies with each letter
15* 7 pt. CG Triumvirate™ Typeface Proportional Varies with each letter
16* 9 pt. CG Triumvirate™ Typeface Proportional Varies with each letter
17* 11 pt. CG Triumvirate™ Typeface Proportional Varies with each letter
18* 15 pt. CG Triumvirate™ Typeface Proportional Varies with each letter
50 EFF Swiss Bold Scalable Varies with each letter
56 PaxarSymbols Proportional Varies with each letter
70 15 pt. Paxar Proportional Varies with each letter
71 18 pt. Paxar Proportional Varies with each letter
72 15 pt. NAFTA Proportional Varies with each letter
73 18 pt. NAFTA Proportional Varies with each letter
* The CG Triumvirate™ typefaces support only ANSI and DOS Code Page 437 and 850 Symbol
Sets. The scalable font does not support Code Page 1256 (Arabic). The Euro symbol( ) at
position ~192 is only available in the Standard, Reduced, and Bold fonts.
To Next Page
Loading...
