11-2 System Administrator’s Guide Classification: Avery Dennison - Public
7. From the side Menu Bar, click Network Configuration.
8. From the Protocols tab, set the Boot Method and Boot Tries if necessary. Click Save
Changes. Any changes made on this screen or other screens do not take effect until
you click Save/Reboot. This process takes a few minutes.
9. From the SNMP tab, change the System Name (printer’s name) if necessary. Click
Save Changes. Any changes made on this screen or other screens do not take effect
until you click Save/Reboot. This process takes a few minutes.
To Next Page
Loading...
