IFD500 Series Pilot Guide
Aux Subsystem 5-59
only change if the destination airport has a specified transition
level.
The factory default setting is FL180, in automatic mode.
High Altitude Airways
This setting controls whether the FMS will present high altitude
airways (e.g. jet airways) in the dropdown menus when a flight
plan is being entered. The factory default setting is “On”.
Low Altitude Airways
This setting controls whether the FMS will present low altitude
airways (e.g. victor airways) in the dropdown menus when a flight
plan is being entered. The factory default setting is “On”.
Arrivals
This setting controls whether the FMS will present instrument
arrival procedures in the dropdown menus when a flight plan is
being entered and whether the arrivals field is presented for
airports. The factory default setting is “On”.
Departures
This setting controls whether the FMS will present instrument
departure procedures in the dropdown menus when a flight plan
is being entered and whether the departures field is presented for
airports. The factory default setting is “On”.
Approaches
This setting controls whether the FMS will present instrument
approach procedures in the dropdown menus when a flight plan
is being entered and whether the approaches field is presented
for airports. The factory default setting is “On”.
Visual Approaches
This setting controls whether the FMS will include visual
approach procedures in the dropdown menus containing
approaches. The factory default setting is “On”.
To Next Page
Loading...
