IFD500 Series Pilot Guide
General 7-33
After the flight, notify an Avidyne Service Center or
Avidyne Customer Support to coordinate for a repair
action
LOSS OF BEZEL CONTROLS
Failure Indication:
All knobs and buttons are non-functional and not respondent to
use.
Functionality Lost:
There will be no ability to change major pages (“FMS”, “MAP”,
“AUX”), to change the nav source, or to swap frequencies
between the active and standby frequencies.
Recommended Pilot Action:
Use touch screen controls to perform all other functions
that are still available
Consider cycling power on the affected IFD via the top
left power knob
After the flight, notify an Avidyne Service Center or
Avidyne Customer Support to coordinate for a repair
action
LOSS OF TOUCHSCREEN CONTROL
Failure Indication:
All touch screen inputs are ignored.
Functionality Lost:
There will be no ability to pan the map, perform graphical flight
planning (“rubber banding”), call up a map popup info box, or
select a #2 or #3 standby frequency for swapping into the active
frequency slot.
Recommended Pilot Action:
Use bezel controls to perform all other functions that are
still available
Verify that touch screen control is not turned off on the
Setup page
To Next Page
Loading...
