IFD500 Series Pilot Guide
7-74 General
TIPS AND TECHNIQUES
Additional Means of Recording Configurations
Avidyne highly recommends recording your user
preferences and configuration settings (including
Maintenance Mode “Config” pages) in an alternate
form (e.g. smart phone photographs of the page
settings) as an additional precaution.
When the download is complete (should take a matter of
seconds), store the fob and/or the files on the fob somewhere
secure.
RELOADING PREVIOUSLY STORED USER DATA
Ensure the fob containing the previously stored user data is
installed in the IFD.
Start the IFD in maintenance mode (see Maintenance Mode
section on page 7-56).
From the Update tab, ensure the dated file(s) of interest (“Restore
<data type> YY.MM.DD-##”) has a checkmark and then press the
“Proceed” LSK option.
When the upload is complete (should take a matter of seconds),
exit Maintenance Mode via pressing the “Done” LSK and then
select the appropriate page (e.g. UTIL option of the SYS tab on
the AUX page) to verify the restored data is present.
It is possible to import user data from IFD simulators but they
must be individually selected for saving onto the fob via the
simulator.
The possible states that can displayed during user data save and
restore operations are:
Selected but hasn’t started yet
To Next Page
Loading...
