Baltech VP-3470 - Page 6

6 List of figures
BALTECH VP-3470
Operation manual
List of gures
Figure 1. Appearance of the display unit 19
Figure 2. Upper panel of the display unit 19
Figure 3. Lower panel of the display unit 20
Figure 4. Front panel of the display unit 21
Figure 5. Rear panel of the display unit 22
Figure 6. BALTECH VP-3470 in the transportation case 23
Figure 7. Mounting methods and measure points 26
Figure 8. Marking in the balancing plane 30
Figure 9. Correction weights 31
Figure 10. Correction weights 31
Figure 11. Angle gauge 32
Figure 12. Connection of the network adapter to the display unit 34
Figure 13. Connection of the display unit to PC 34
Figure 14. Window «Properties» 36
Figure 15. Measurements 37
Figure 16. General parameters menu 41
Figure 17. Set date/time 42
Figure 18. Standby mode 42
Figure 19. Backlight 42
Figure 20. Language 43
Figure 21. About device 43
Figure 22. Selftest 43
Figure 23. Sensors menu 44
Figure 24. Channel 1 45
Figure 25. Channel 2 45
Figure 26. Add 46
Figure 27. Edit 46
Figure 28. Delete 46
Figure 29. Delete 47
Figure 30. Conrm deletion 47
Figure 31. Measurements menu 48