Banner AG4 Series - Cleaning the Scatter Screens

Banner AG4 Series Safety Laser Scanner
Particles/drops, smearing
Wet with cloth soaked in AG4 cleanser
Wipe free in one swipe with cleaning cloth
Water drops
Wipe free in one swipe with cleaning cloth
Oil drops
Wet with cloth soaked in AG4 cleanser
Wipe free in one swipe with cleaning cloth
Fingerprints
Wet with cloth soaked in AG4 cleanser
Wipe free in one swipe with cleaning cloth
Scratches
Replace front screen
If the cleaning takes longer than four seconds (removing fingerprints,
for example), the Scanner displays a front screen monitoring fault. If
this occurs, reset the Scanner using the Start/restart switch.
Soak cloth with cleanser.
Wipe front screen free in one swipe.
Figure 5-3. Front screen cleaning procedure
5.4.3 Cleaning the Scatter Screens
Soak cloth with cleanser.
Wipe scatter screen free in one swipe.
Figure 5-4. Scatter screen cleaning procedure
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com