Banner iVu Plus BCR Gen2 Series - Page 104

WORD # WORD NAME DATA TYPE
172 Command Response Int16 16-bit integer
173-174 Command Response Int32 32-bit integer
175-176 Command Response Float Float
177-178 Command Response Length 32-bit integer
179-228 Command Response Data 100 Byte Array
229-239 reserved 16-bit integer
PLC Assembly Instance 102 (0×66) - 240 Registers (iVu BCR Outputs/PLC
Inputs)
Data transfer direction: Target (iVu BCR) to Originator (PLC). Assembly Instance 102 provides space for data from up to ten
different barcodes read in the same inspection.
WORD # WORD NAME DATA TYPE
0 Input Bits ACK Register (see Input and Output Flags Bits (p. 106)) 16-bit integer
1 Output Bits Register (see Input and Output Flags Bits (p. 106)) 16-bit integer
2-3 Error Code 32-bit integer
4-5 Inspection Number 32-bit integer
6-7 Iteration Count 32-bit integer
8-9 Pass Count 32-bit integer
10-11 Fail Count 32-bit integer
12-13 Missed Triggers 32-bit integer
14-15 Current Inspection Time Float
16 Sensor Pass/Fail Coil 16-bit integer
17-29 reserved 16-bit integer
30 Barcode Count 16-bit integer
31 Barcode-1 Type 16-bit integer
32 Barcode-1 Length 16-bit integer
33-50 Barcode-1 Data 32-bit length + 32-byte array
51 Barcode-2 Type 16-bit integer
52 Barcode-2 Length 16-bit integer
53-70 Barcode-2 Data 32-bit length + 32-byte array
71 Barcode-3 Type 16-bit integer
72 Barcode-3 Length 16-bit integer
73-90 Barcode-3 Data 32-bit length + 32-byte array
91 Barcode-4 Type 16-bit integer
92 Barcode-4 Length 16-bit integer
93-110 Barcode-4 Data 32-bit length + 32-byte array
111 Barcode-5 Type 16-bit integer
112 Barcode-5 Length 16-bit integer
113-130 Barcode-5 Data 32-bit length + 32-byte array
131 Barcode-6 Type 16-bit integer
iVu Plus BCR Gen2 Series Sensor
104 www.bannerengineering.com - Tel: + 1 888 373 6767