Setting Factory Default Applicable Product
Industrical Ethernet: String (EtherNet/IP and PCCC Protocol) 32 bit XS/SC26-2, SC10-2
Network Settings: Gateway Address 0.0.0.0 XS/SC26-2, SC10-2
Network Settings: IP Address 192.168.0.128 XS/SC26-2, SC10-2
Network Settings: Link Speed and Duplex Mode Auto Negotiate XS/SC26-2, SC10-2
Network Settings: Subnet Mask 255.255.255.0 XS/SC26-2, SC10-2
Network Settings: TCP Port 502 XS/SC26-2, SC10-2
Open-to-Closed Debounce Time 50 ms XS/SC26-2, SC10-2
Power up mode Normal SC10-2
Safety Outputs Automatic reset (trip mode) XS/SC26-2, SC10-2
Safety Outputs: Power-up Mode Normal XS/SC26-2
Safety Outputs: Split (Safety Outputs) Function in pairs XS/SC26-2
Simulation Mode: Simulation Speed 1 XS/SC26-2, SC10-2
Automatic Terminal Optimization Enabled SC10-2
Status Output Signal Conventions Active = PNP On XS/SC26-2, SC10-2
XS/SC26-2 and SC10-2 Safety Controllers
www.bannerengineering.com - Tel: + 1 888 373 6767 143
To Next Page
Loading...
Need help?
General
