2. General
Exhaust outlet for external fan
The exhaus t outlet has an output voltage of 200–240V at 50–60 Hz ; switched and maxim um 3 amperes is allowed.
The connection between the exhaust outlet and the external blower must be done with a certified AC power supply co rd of minimum
0,75 m m² or 18 AWG and minimum 300V.
CAUTION: Th e 200–240V power outlet (exhaust outlet) of the projector m ay not be u sed to provide power to
any o ther device than an external exh aust fan. Maxim um allowed cu rrent : 3A.
Projector weight
Do not underestimate the weight of the Barco DP2K-32B. The projector weights about ±140 kg (±309 lb.) without lens. Be sure that
the pedestal on which the projector has to be installed is capable of handling five (5) times the complete load of the system.
Barco offers a p edestal for the DP 2K-32B . This universal pedestal allows a so lid and easy setup of the projec-
tor. The universal pedestal has a separate com partmen t to install the UPS unit for the DP2K- 32B. Futhermore,
the un iversal pedestal contains a standard 19” rack to build in the projector peripherals such as alternative
content sw itchers (e.g. ACS-2048)
R59770491 DP2K-32B 30/04/2010 11
To Next Page
Loading...
