12. Lamp House & Lamp replacement
A Reset lam p parameters window opens (2).
2. To get history of the used lam ps, click from history (3).
The Reset lamp history selection window opens (4).
3. C lick o n Select (5) to display a list of possible lam ps (6 ).
4. S elect the desired lamp (7) and click OK (8).
The article number and serial number of the selected lamp is added to the Reset lamp parameters window (10). The lamp run
time and number of strikes of this lamp are added in La mp parameter preview (12).
5. The lamp pa rameters can be edited by the user under personnel maintena nce and responsibility. If you want to change these
parameters, check the check box in front of Edit lamp parameters (11).
The current parameter fields becom e active (12).
6. C lick in an input field and change to the des ired value.
7. C lick Reset lamp (13).
R5977692 DP2K-S SERIES 10/12/2012
97
To Next Page
Loading...
Need help?
General
