2. Getting to know the projector.
Name Pcs Description Purpose
DMX IN 1 DM X 512 input
For Projector Control
DMX OUT
1 DM X 512 output
For Projector Control
RS-232
1 9–pin D B9 connector
For Projector Control. A llows for wired rem ote control and
monitoring of many projector functions used in installation
environments
Sync 3 BN C Sync Port IN/OUT; B idirectional
mini-DIN (1x 3D sync O ut, and 2x
Sync In/Out)
For Pro jector Con trolThis is m ainly used in m ultiple projector
installations with requirement of synchronization between
the units
Tr igger
3 (one in
front, two
on rear
panel)
12VDC - 0,5A (6W) For Con trolling Peripherals, like m otorized screens, curtains
etc. Give 12V output when projector are switched on
RC 1 Jack connector for wired remote For Projector Control
USB 3 US B 2.0 type A, 4 pin( 2x Rear and
1x Front)
For Software upgrade
LAN 1 Standard RJ45 connector F or Projector Control
DP 2 Standard display port For Projector Input
DL-DVI-D 2 Dual DV I-I 1.0 (DVI_D F unctionallity). For Projector Input. These connectors can also be used to
form one uniform image by feeding half of the im age into
each connector. HDCP compliant for sources up 165 M hz
HDMI 1 Standard HDM I 2.0 F or Projector Input
HDBaseT 1 Standard RJ45 8P8C Connec tor For Projector C ontrol
SDI 2 SDI1 is Input, SDI 2 is pa ss t hrough.
(out)
For Projector Input
Connectors
2.12 Color Wheels
About
The F 70 Projector is delivered with a standard Color wheel, that is suitable for most applications.
Other colorwheels are available upon request.
Consult Barco sales office or a service partner in order to find the m ost suitable c olorwheel for the specific ap plication.
2.13 Optional Accessories
Rigging Frame
Item Numb er Item D escription
Under Construction Rigging frame F70 series. (Under Cons truction).
The F70 Rigging fram e is a rugged, easy to install frame, designed to streamline the process of installing one or more projectors.
When installed i the frame, the projector:
• can be rotated around the x, y and z axis, in order to obtain a seamless adjustment in applications using multiple projec tors.
• Can be ins talled from a truss or a pedestal.
• Can be easily stacked one on top o f another, for instance a dual or multichannel installations.
Flight Case
Item Numb er Item D escription
Under Construction Flight case F70 series. (Under Cons truction)
The F70 Flight Case is a custom des igned c ontainer, that is suitable for shipping the projector, including flight frame, signal and
power cords and up to two lens es.
The case is fully-lined to protect t he projector and lenses during transit and storage.
24
601–426 F70 SERIES 16/06/2017