7. Image menu
Default value: 0.00
7.5 Saturation
About
Image / Saturation
Saturation levels impact on the white levels and the intensity of the color display; the higher the value, the m ore vivid the c olor display
will be.
Available range: —1.00 to 1.00
Default value: 0.00
7.6 Advanced image adjustments
About
Image / Advanced
Advanced image adjus tment settings that enable greater control, par ticularly during calibration.
Not all settings are available for all source types. Settings that are not available for the active source will be
grayed out an d not available for selection.
P7 RealColor
Advanced functionality for color m anagem ent.
Image / Advanc ed / P 7 RealColor —>White point
Select how to adjust the white point. There are two alternatives: temperature and coordinate.
Temperature
The w hite point is specified on a Kelvin scale be tween 3200K – 13000K tracking a long the blac k body curve.
Coordinate Coordinate: The white point is specified using an x,y coordinate in the CIE 1931 Chart.
Color mode
Image / Advanc ed / P7 RealColor — >Color Mode
Used to set the coordinates for color processing mode: RGB, RGBC MY, White.
RGB Red, Green and B lue are moved according to the specified d esired coordinates. Cyan, M agenta and Yellow
are calculated accordingly.
RGBCMY Red, Green, B lue, Cyan, Magenta and Yellow are m oved according to the specified desired coordinates.
White White point only. No cha nges to RGBCM Y. Default: White
Native Native Co lors. (Color Correction Off).
Native values
System Setting/ Service / Color —>Measured values
The current m easured values (WRG B ) used for RealColor processing.
These values must be accurate for RealColor to per
form correctly.
Current values ar e presented in the color gamut diagram. Measured values are represented by a solid line.
Default: values measured at the manufacturers facility.
Custom values
Image / Advanced / P7 RealColor — >Desired values
Allows users to specific yn red, green blue, cyan, magenta and y ellow color coo rdinates (x ,y) and gain.
Default: RE C 709 color points.
Current values ar e presented in the color gam ut diagram. Desired values are represented by a dotted line.
601–426 F70 SERIES 16/06/2017
51
To Next Page
Loading...
Need help?
General
