5. Getting started
5.4 Power modes
General
The table below details the F70 power modes.
Mode Description
Normal Projector is b ooted up a nd the light source is on
Ready
Projector is booted up but the light sour ce is off
ECO Standby Lig ht source is s witched o ff and projector electronics are
powered down
5.5 Customize projector settings
About
The pro jector display, behavior a nd user interface can be adjusted to meet individual requirements.
Options include:Home/System Settings/Themes
• Adjust the OSD menu color
5.6 User interface
Overview
• On S creen Display (OS D)
5.6.1 On Screen Display (OSD)
About
The pro jector on screen display (OSD ) is the primary u ser interface (UI). F rom here, y ou can review and adjust all projector and
display settings.
The OSD interface uses tabs to display the main menu. Topics are then further sorted and displayed by function: main (topic) —
sub (function) — sub (function).
There are six m ain menu tabs: Source, Image, Installa
tion, System settings, Test pattern and Status.
The OSD can be disabled by pressing the OSD on/off button.
In order to show the O SD , the OSD On /Off bu tton must b e disabled. (Wh ite backlight on the button). When
the button have blue illumination, the OSD will not appear, and the display information are only visible on the
LCD Display. O nly Critical warnings will be displayed.
User access levels
The projector’s software platform us es access levels to define what each user can do.
There are two user ac cess levels: S tandard User and Power User. In addition, there is a Service user access for certified Service
personnel.
A standard user has ac cess to all projector functionality and OSD me nu items. A power user has , in addition to access to all p rojector
functionality and O S D menu items, access to a number of advanced functions. Access to power user features is password-protected.
Contact your projector supplier for more information.
Navigation
You can navigate the OSD using the local keypad or the remote control.
Press the ME NU button to display the OSD.
Use the arrow keys to navigate left, right, up and down .
Press the OK button to select a menu topic and get more options.
Use the numeral keys to enter values , or use the arrow keys to move the barscale up or down.
Press ME NU again to exit the menu system.
601–426 F70 SERIES 16/06/2017
45