5. Getting started
Press the OSD button to deactivate the OSD on the screen. Only critical warnings will be displayed.
Some menu options are reserved f or Power or S ervice Users; these will be grayed out and not available for
selection w h en in standard user mode. To access these features, enter yo ur Po wer o r Service Cod e in the
Service Menu or contact your support representative for mo re information.
Define values
Menu settings are displayed using checkboxes, barscale sliders, and drop-down lists.
To set a value:
• Press OK to select or des elect a checkbox (turn a function O N or OF F).
• Use the arrow keys to mo ve the bars cale slider up or d o wn on the value line. F or a barscale 0-9, each s tep will equ al 10% of
the total value.
• To enter the value as a direct num ber, press ENTER, input the digit(s), and then Press ENTER again to ex ecute a
nd exit cursor
mode e.g. EN TER 79 ENTER.
Changes to values are impleme nted dynam ically.
Menu memory
The OS D menu remembers the last selected sub –item as long as the projector is runn ing. The menu memory is reset when restarting
the projector from standby.
46
601–426 F70 SERIES 16/06/2017
To Next Page
Loading...
Need help?
General
