Barco MDSC-2224 - 4 Daily Operation; Keyboard Activation;Deactivation

4. Daily operation
4. DAILY OPERATION
4.1 Keyboard activation/deactivation
To activate the keyboard:
In order to avoid unwanted or accidental activation of the OSD keyboard, a lock/unlock mechanism has
been implemented. This means that, before the OSD keyboard can be used to change any of the setting
of the display, it needs to be unlocked.
1. Swipe a finger from the power button zone to the left for about 12 cm.
Image 4-1
As a result, the keys will light up and are now available for further actions. However, if no further actions
are taken within the following 10 seconds, the keyboard backlight will dim and the keys will be locked
again.
To deactivate the keyboard:
1. The keyboard will automatically lock after 1
0 seconds of inactivity, except while navigating the OSD
menu, during which it remains unlocked.
As a result, Its backlight switches off to indicate the keyboard is locked.
Or,
manually lock the keyboard by sweeping your finger over the bottom right hand side of your display.
Image 4-2
(451920611391)K5903031 MDSC-2224 21/01/2014 21