5. Advanced operation
5.2.6 Clock/Line
This menu item is only available when VGA input is connected.
About clock/line
If the result of the Auto Adjustment procedure described above isn’t satisfactory, the Clock/Line can be
manually adjusted by following this procedure.
To manually adjust the phase
1. Bring up the OSD main menu.
2. Navigate to the Picture advanced menu.
3. Enter the Clock/Line submenu.
The command bar Clock/Line is highlighted.
4. Set the clock/line as desired and confirm.
5.3 D isplay Format menu
Overview
• Main Source (Primary Source)
• Component Mode
• Zoom
•ImageSize
•2
nd
Picture Mode
•2
nd
Picture Source
•2
nd
Picture Position
•PictureSwap
5.3.1 Main Source (Primary Source)
About main sources
The available main sources for your display are:
•AutoSearch
• Composite
•S-Video
• Component
• PC Analog
•DVI1
•DVI2
•SDI1
•SDI2
• Nexxis
•DisplayPort
36
(451920611391)K5903031 MDSC-2224 21/01/2014
To Next Page
Loading...
Need help?
General
