Barco MDSC-2224 - Component Mode; Zoom

5. Advanced operation
Available main sources dependent on display model.
The main source can also be selected through a shortkey function or via the extended
keyboard functionality.
To select the main source
1. Bring up the OSD main menu.
2. Navigate to the Display Format menu.
3. Enter the Main Source submenu.
4. Select one of the available main source and confirm.
Note: If you selected the Auto Search preset, the display will automatically detect the connected signal.
5.3.2 Component Mode
About component modes
The available component modes for your display are:
• YPbPr
•RGB
To select the component mode
1. Bring up the OSD main menu.
2. Navigate to the Display Format menu.
3. Enter the Component Mode submenu.
4. Select one of the available component modes and confirm.
5.3.3 Zoom
About zoom
The available zoom factors for your display are:
•None
•10%
•20%
•30%
•40%
•50%
The zoom factor can also be selected through a shortkey function or via t he extended
keyboard functionality.
To select a zoom factor
1. Bring up the OSD main menu.
2. Navigate to the Display Format menu.
(451920611391)K5903031 MDSC-2224 21/01/2014
37