Barco MDSC-2224 - OSD Time-Out; Recall Profile; Save Profile

5. Advanced operation
5.4.5.3 OSD Time-out
About OSD time-out
The available OSD time-out values for your display are:
•10Sec.
•20Sec.
•30Sec.
•60Sec.
•Disabled(=5minutes)
To adjust the OSD time-out
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the OSD setting submenu.
4. Select OSD Time-out
5. Select one of the available OSD time-out values and confirm.
5.4.6 Recall Profile
About recalling profiles
To re ca l l a p ro file means to restore the default factory settings (Factory and X Ray profiles) or recall the
use defined profiles.
Theavailableprofiles to recall from your display are:
•Factory
•XRay
•User1
•User2
•User3
To recall a profile
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Recall Profile submenu.
4. Select one of the available profiles to recall and confirm.
5.4.7 Save Profile
About saving profiles
The user can modify the default video parameters associated to each profile and save the new parameters
setting under the User 1, User 2 or User 3 profile. The Factory and X Ray profiles can be modified, but
the factory default can’t be overwritten and can always be recalled through the recall profile menu item.
Theavailableprofiles to save in your display are:
•User1
•User2
•User3
(451920611391)K5903031 MDSC-2224 21/01/2014
43