5. Advanced operation
4. Select one of the available options and confirm.
5.5.3 DVI Output
About DVI output
This setting allows you to select which digital input to replicate on DVI out.
The available options are (depending on display version):
•DVI1
•DVI2
• Nexxis
•None
This feature i s subject t o restrictions in case of Multi-ima ge (PiP, SbS).
To select the DVI output
1. Bring up the OSD main menu.
2. Navigate to the System menu.
3. Enter the DVI output submenu.
4. Select one of the available options and confirm.
5.5.4 Keyboard lock
About keyboard locking
This setting allows you to disable the keyboard functionality and avoid unwanted access to the OSD func-
tions.
Accessing the OSD menu is only possible after pressing a sequence of key
s. Please refer to the dedicated
section for more details (Keyboard locking/unlocking).
To enable/disable keyboard locking
1. Bring up the OSD main menu.
2. Navigate to the System menu.
3. Enter the Keyboard Lock submenu.
4. Enable/Disable keyboard locking as desired and confirm.
5.5.5 Keyboard backlight
About the keyboard backlight
By default, after lighting up, the keyboard backlight will d
im again if no further actions are taken within the
following 5 seconds. However, this behavior can be changed so that the keyboard backlight is always on.
To adjust the k eyboard backlight
1. Bring up the OSD main menu.
2. Navigate to the System menu.
3. Enter the Keyboard Backlight submenu.
4. Select one of the available options and confirm.
(451920611391)K5903031 MDSC-2224 21/01/2014
45
To Next Page
Loading...
Need help?
General
