35
Tint
Use to adjust the tint (balance between magenta and green) of the projected image.
Lowering the value will make the image appear redder; increasing the value will make the
image appear greener.
Reduced tint
Enhanced tint Original image
Sharpness
The adjustment of sharpness primarily changes the value of high frequency detail. You can
connect the projector to an external image source to display an image resembling the one
shown below to adjust the image sharpness.
The following image illustrates the results of direct sharpness adjustment using a random
image:
Reduced sharpness
Enhancedsharpness Original image
6
OSD Menu description
To Next Page
Loading...
