48
Trigger1 ~2
The projector comes with two sets of Trigger output. You can configure two different devices
connected to the projector via the trigger ports to be automatically turned on when the
projector is on. There will be a 2-3 second delay prior to activation to prevent operation of this
function when the user is choosing the desired aspect ratio.
5:4 Outputs 12V of power on Trigger1 or 2 when the user chooses the 5:4 aspect
ratio.
4:3 Outputs 12V of power on Trigger1 or 2 when the user chooses the 4:3 aspect
ratio.
16:10 Outputs 12V of power on Trigger1 or 2 when the user chooses the 16:10 aspect
ratio.
16:9 Outputs 12V of power on Trigger1 or 2 when the user chooses the 16:9 aspect
ratio.
1.88 Outputs 12V of power on Trigger1 or 2 when the user chooses the 1.88 aspect
ratio.
2.35 Outputs 12V of power on Trigger1 or 2 when the user chooses the 2.35 aspect
ratio.
Letterbox Outputs 12V of power on Trigger1 or 2 when the user chooses the Letterbox
aspect ratio.
Native Outputs 12V of power on Trigger1 or 2 when the user chooses the native aspect
ratio.
Auto Outputs 12V of power on Trigger 1 or 2 when the projector is turned on.
Auto Source
Off: default setting. By enabling this function, the projector will automatically determine
the source of input every time it is turned on so that the user will not have to make the
selection on the OSD Menu.
Setting the function off will require the user to specify source of image input on the OSD
Menu in order for the projector to display the intended image.
Language
You can use this function to select the language you wish for the OSD Menu to be displayed
in. You can choose from the following nine languages:
English, French, Spanish, German, Portuguese, Simplified Chinese, Traditional Chinese,
Japanese and Korean.
6
OSD Menu description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
