Basler scout GigE User Manual

Standard Features AW00011916000
312 Basler scout GigE
Setting Your System for Event Reporting
Event reporting must be enabled in the camera and some additional software-related settings must
be made. This is described in the "Camera Events" code sample included with the pylon software
development kit.
Event reporting must be specifically set up for each type of event using the parameter name of the
event and of the supplementary information. The following table lists the relevant parameter names:
You can enable event reporting and make the additional settings from within your application
software by using the pylon API. For more information, see the "Camera Events" code sample
included with the pylon software development kit.
For more detailed information about using the pylon API, refer to the Basler pylon Programmer’s
Guide and API Reference.
Event Event Parameter Name Supplementary Information
Parameter Name
AcquisitionStart AcquisitionStartEventData AcquisitionStartEventStreamChannelIndex
AcquisitionStartEventTimestamp
Acquisition Start
Overtrigger
AcquisitionStartOvertriggerEventData AcquisitionStartOvertriggerEventStreamChannelIndex
AcquisitionStartOvertriggerEventTimestamp
FrameStart FrameStartEventData FrameStartEventStreamChannelIndex
FrameStartEventTimestamp
Frame Start
Overtrigger
FrameStartOvertriggerEventData FrameStartOvertriggerEventStreamChannelIndex
FrameStartOvertriggerEventTimestamp
Exposure End ExposureEndEventData ExposureEndEventFrameID
ExposureEndEventStreamChannelIndex
ExposureEndEventTimestamp
Event Overrun EventOverrunEventData EventOverrunEventStreamChannelIndex
EventOverrunEventTimestamp
Table 21: Parameter Names of Events and Supplementary Information

Basler scout GigE Specifications

General

Brand	Basler
Model	scout GigE
Category	IP Camera
Language	English