Basler scout GigE - Sensor Positioning Accuracy

AW00011916000 Specifications, Requirements, and Precautions
Basler scout GigE 27
1.5.1.2 Sensor Positioning Accuracy
The sensor positioning accuracy for cameras equipped with a standard C-mount lens adapter is as
shown in Figure 23. The sensor positioning accuracy for cameras equipped with an optional CS-
mount lens adapter is as shown in Figure 24 on page 28.
Fig. 23: Sensor Positioning Accuracy for Cameras with the Standard C-mount Lens Adapter
= reference plane
*
= tolerance to the center of the
lens mount (optical axis)
**
= tolerance to the reference planes
± 0.02
(This is the sensor tilt tolerance. It applies to every point on the
photosensitive surface and is relative to the center of the die)
17.5
+
-
0
0.06
(This tolerance is for the distance between the front of the
lens mount and the sensor’s photosensitive surface.
Note that this tolerance and the sensor tilt tolerance (see
above) must be combined to obtain the total tolerance for
every point on the photosensitive surface.)
Photosensitive
surface
of the sensor
± 0.25 *
± 0.4 **
Maximum Sensor Tilt Angle (Degrees)
Camera Model Tilt X Tilt Y Camera Model Tilt X Tilt Y
scA640-70gm/gc 0.47 0.63 scA1300-32gm/gc 0.47 0.63
scA640-74gm/gc 0.35 0.47 scA1390-17gm/gc 0.31 0.42
scA640-120gm/gc 0.62 0.83 scA1400-17gm/gc 0.25 0.34
scA750-60gm/gc 0.51 0.80 scA1400-30gm/gc 0.25 0.34
scA780-54gm/gc 0.35 0.47 scA1600-14gm/gc 0.34 0.52
scA1000-30gm/gc 0.46 0.63 scA1600-28gm/gc 0.34 0.52