Basler scout GigE User Manual

Physical Interface AW00011916000
78 Basler scout GigE
7.3 Connector Types
7.3.1 8-pin RJ-45 Jack
The 8-pin jack for the camera’s Ethernet connection is a standard RJ-45 connector.
The recommended mating connector is any standard 8-pin RJ-45 plug. Cables terminated with
screw-lock connectors are available from Basler. Contact your Basler sales representative to order
cable assemblies.
Suitable cable assemblies are also available from e.g. Components Express, Inc. and from the
Intercon 1 division of Nortech Systems, Inc.
To ensure that you order cables with the correct connectors, note the vertical orientation of the
screws before ordering.
Green and Yellow LEDs
This RJ-45 jack on the camera includes a green LED and a yellow LED. When the green LED is lit,
it indicates that an active network connection is available. When the yellow LED is lit, it indicates
that data is being transmitted via the network connection.
7.3.2 12-pin Connector
The 12-pin connector on the camera is a Hirose micro receptacle (part number HR10A-10R-12P)
or the equivalent.
The recommended mating connector is the Hirose micro plug (part number HR10A-10P-12S) or the
equivalent.

Basler scout GigE Specifications

General

Brand	Basler
Model	scout GigE
Category	IP Camera
Language	English