AW00011916000 Color Creation and Enhancement
Basler scout GigE 183
10.3.2 Gamma Correction
The gamma correction feature lets you modify the brightness of the pixel values output by the
camera’s sensor to account for a non-linearity in the human perception of brightness. There are two
modes of gamma correction available on the camera: sRGB and User.
sRGB Gamma
When the camera is set for sRGB gamma correction, it automatically sets the gamma correction to
adjust the pixel values so that they are suitable for display on an sRGB monitor. If you will be
displaying the images on an sRGB monitor, using this type of gamma correction is appropriate.
User Gamma
With User type gamma correction, you can set the gamma correction value as desired.
To accomplish the correction, a gamma correction value () is applied to the brightness value (Y) of
each pixel according to the following formula:
The formula uses uncorrected and corrected pixel brightnesses that are normalized by the
maximum pixel brightness. The maximum pixel brightness equals 255 for 8 bit output and 4095 for
12 bit output.
The gamma correction value can be set in a range from 0 to 3.99902.
When the gamma correction value is set to 1, the output pixel brightness will not be corrected.
A gamma correction value between 0 and 1 will result in increased overall brightness, and a gamma
correction value greater than 1 will result in decreased overall brightness.
In all cases, black (output pixel brightness equals 0) and white (output pixel brightness equals 255
at 8 bit output and 4095 at 12 bit output) will not be corrected.
Enabling and Setting Gamma Correction
You can enable or disable the gamma correction feature by setting the value of the Gamma Enable
parameter.
You can use the Gamma Selector to select either sRGB or user gamma correction.
If you select user gamma correction, you can use the Gamma parameter to set the gamma
correction value.
To Next Page
Loading...
Need help?
General
