NOTICE
Environmental damage caused by improper disposal of waste oil!
Dispose of used oil as special waste. Be mindful of the local regulations relating
to the disposal of special waste.
8.
Dispose of used oil.
Changing the oil filter
The required replacement parts are available.
Fig. 23 Replacing the oil filter
1 Cover of the oil filter housing 3 Filter element
2 Sealing ring 4 Closing slug
1.
Use key SW 13 to undo the screws on the cover of the oil filter housing.
2.
Pull the oil filter out of the oil filter housing, along with the cover.
3.
Detach the oil filter from the cover.
4.
Insert new oil filter.
5.
Install and fasten cover.
6.
Fill oil, see Filling oil, Page 94.
OPERATING MANUAL Maintenance | 9
28.08.2019
A_002_en
93/150
To Next Page
Loading...
