BeagleBone Black - 11.0 Support Information; 11.1 Hardware Design

REF: BBONEBLK_SRM
BeagleBone Black System
Reference Manual
Rev A5.2
Page 107 of 108
11.0 Support Information
All support for this design is through the BeagleBoard.org community at:
beagleboard@googlegroups.com
or
http://beagleboard.org/discuss .
11.1 Hardware Design
Design information can be found on the SD card that ships with board under the
documents/hardware directory when connected using the USB cable. Provided there is:
 Schematic in PDF
 Schematic in OrCAD (Cadence Design Entry CIS 16.3)
 PCB Gerber
 PCB Layout File (Allegro)
 Bill of Material
 System Reference Manual (This document).
You can also download the files from http://beagleboard.org/hardware/design or from the
Circuitco WIKI at http://circuitco.com/support/index.php?title=BeagleBoneBlack
11.2 Software Updates
It is a good idea to always use the latest software. Instructions for how to update your
software to the latest version can be found at:
http://circuitco.com/support/index.php?title=BeagleBoneBlack#Updating_the_eMMC_S
oftware