Section VIII BEECHCRAFT Bonanza
Handling, Serv - Maint V35, V35A & V35B thru 0-9947
type waxes, polishes, or rubbing compounds, as these
products cause eventual deterioration of the characteristic
urethane gloss. Epoxy finishes should be waxed on a
regular basis, and may be polished and buffed to restore
appearance should "chalking" occur. For waxing, select a
high quality automotive or aircraft waxing product. Do not
use a wax containing silicones, as silicone polishes are
difficult to remove from surfaces. A buildup of wax on any
exterior paint finish will yellow with age; therefore, wax
should be removed periodically. Generally, alphatic naptha
(see Consumable Materials) is adequate and safe for this
purpose.
8-28
NOTE
Before returning the airplane to service,
remove all maskings and coverings, and re-
lubricate as necessary.
Revised: March 1983
To Next Page