Bend-Tech Dragon mAchines User Manual

48 Bend-Tech Dragon
Troubleshooting Guide
Control Box Troubleshooting
07
5. Place the Powered Gate Driver Box
On Dragon A400 machines equipped with a Powered Gate, the Powered Gate Driver Box
should be placed on top of the main Control Box. The Powered Gate Driver Box is secured
with Velcro which is pre-installed on the Control Boxes.
6. Control Box Connections
Transfer all cable, wiring and compressed air connections from the old Control Box to the new
Control Box. Bend-Tech recommends starting at either the top or bottom of the old Control Box
and transfer each connection individually. Using this method will avoid mis-connections.

Bend-Tech Dragon mAchines Specifications

General

Brand	Bend-Tech
Model	Dragon mAchines
Category	Industrial Equipment
Language	English