Benelli TRK 502 User Manual

3 - 10
Instrument and control functions
EN
3
below or equal to about 5 km/h.
• The ABS does not work in case of low
battery.
NOTICE
Be careful not to damage the wheel sensor
or wheel sensor rotor; otherwise, improper
performance of the ABS will result.
1. Front wheel sensor
2. Front wheel sensor rotor
1. Rear wheel sensor
2. Rear wheel sensor rotor
Fuel tank cap
To open the fuel tank cap
Open the fuel tank cap lock cover, insert the
key into the lock, and then turn it 1/4 turn
clockwise. The lock will be released and the
fuel tank cap can be opened.
To close the fuel tank cap
1. Push the fuel tank cap into position with the
key inserted in the lock.
2. Turn the key counterclockwise to the ori-
ginal position, remove it, and then close the
lock cover.
1
1
2
1
1
1
2
1

Benelli TRK 502 Specifications

General

Displacement	500 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Seat Height	800 mm
Wet Weight	235 kg
Bore x Stroke	69 mm x 66.8 mm
Compression Ratio	11.5:1
Clutch	Wet multi-plate
Frame	Steel trellis
Wheelbase	1505 mm
Ground Clearance	190 mm
Max Power	47.6 hp (35 kW) @ 8500 rpm
Max Torque	46 Nm @ 6000 rpm
Front Suspension	50 mm upside-down fork
Front Brake	Double floating discs, 320mm, 4-piston calipers
Rear Brake	Single 260 mm disc
Fuel System	Electronic Fuel Injection (EFI)
ABS	Dual-channel ABS
Front Tire	120/70 R17
Rear Tire	160/60 R17
Engine Type	Liquid-cooled, four-stroke, parallel twin cylinder, DOHC, 4 valves per cylinder