Benelli TRK 502 User Manual

EN
6
6 - 30
Periodic maintenance and adjustment
WARNING
Do not use a fuse of a higher amperage ra-
ting than recommended to avoid causing
extensive damage to the electrical system
and possibly a re.
1. Fuel Pump
2. Fan
3. ECU1
4. Services
5. Lights
3. Turn the key to “
” and turn on the electri-
cal circuit in question to check if the device
operates.
4. If the fuse immediately blows again, have a
Benelli dealer check the electrical system.
Brake/tail light and the turn signal
light
This model is equipped with LED-type headli-
ghts and LED-type turn signal light.
If a headlight and turn signal light does not
come on, check the fuses and then have a Be-
nelli dealer check the vehicle.
1. Brake/tail light
2. Turn signal light
Specied fuses:
Fuel pump fuse: 15.00A
Fan fuse: 15.00 A
ECU1 fuse: 15.00 A
Services fuse: 10.00 A
Lights fuse: 15.00 A
10A 15A 15A 15A 15A
1 2 3 4 5
2
2
1

Benelli TRK 502 Specifications

General

Displacement	500 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Seat Height	800 mm
Wet Weight	235 kg
Bore x Stroke	69 mm x 66.8 mm
Compression Ratio	11.5:1
Clutch	Wet multi-plate
Frame	Steel trellis
Wheelbase	1505 mm
Ground Clearance	190 mm
Max Power	47.6 hp (35 kW) @ 8500 rpm
Max Torque	46 Nm @ 6000 rpm
Front Suspension	50 mm upside-down fork
Front Brake	Double floating discs, 320mm, 4-piston calipers
Rear Brake	Single 260 mm disc
Fuel System	Electronic Fuel Injection (EFI)
ABS	Dual-channel ABS
Front Tire	120/70 R17
Rear Tire	160/60 R17
Engine Type	Liquid-cooled, four-stroke, parallel twin cylinder, DOHC, 4 valves per cylinder