Benelli TRK 502 User Manual

EN
9
Consumer information
9 - 1
Identication numbers
Record the vehicle identication number, en-
gine serial number, and the model label infor-
mation in the spaces provided below.
These identication numbers are needed
when registering the vehicle with the autho-
rities in your area and when ordering spare
parts from a Benelli dealer.
VEHICLE IDENTIFICATION NUMBER:
ENGINE SERIAL NUMBER:
MODEL LABEL INFORMATION:
Vehicle identication number
The identication number of the vehicle is
punched on the steering head; this number
is registered with the relevant authorities for
the area concerned.
Record this number in the space provided.
Engine serial number
The engine serial number is punched on the
engine casing, to the right side of the rider
and is the construction serial number of the
engine.
Record this number in the space provided.

Benelli TRK 502 Specifications

General

Displacement	500 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Seat Height	800 mm
Wet Weight	235 kg
Bore x Stroke	69 mm x 66.8 mm
Compression Ratio	11.5:1
Clutch	Wet multi-plate
Frame	Steel trellis
Wheelbase	1505 mm
Ground Clearance	190 mm
Max Power	47.6 hp (35 kW) @ 8500 rpm
Max Torque	46 Nm @ 6000 rpm
Front Suspension	50 mm upside-down fork
Front Brake	Double floating discs, 320mm, 4-piston calipers
Rear Brake	Single 260 mm disc
Fuel System	Electronic Fuel Injection (EFI)
ABS	Dual-channel ABS
Front Tire	120/70 R17
Rear Tire	160/60 R17
Engine Type	Liquid-cooled, four-stroke, parallel twin cylinder, DOHC, 4 valves per cylinder