EasyManuals Logo

Benelli TRK 502 User Manual

Benelli TRK 502
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
EN
5
Operation and important riding points
5 - 3
Engine break-in
There is never a more important period in the
life of your engine than the period between
0 and 1600 km (1000 mi). For this reason, you
should read the following material carefully.
Since the engine is brand new, do not put an
excessive load on it for the rst 1600 km (1000
mi). The various parts in the engine wear and
polish themselves to the correct operating
clearances.
During this period, prolonged full-throttle
operation or any condition that might result
in engine overheating must be avoided.
0–1000 km (0–600 mi)
Avoid prolonged operation above 5600 r/min.
NOTICE
After 1000 km (600 mi) of operation, the
engine oil must be changed and the oil l-
ter cartridge or element replaced
1000–1600 km (600–1000 mi)
Avoid prolonged operation above 6800 r/min.
1600 km (1000 mi) and beyond
The vehicle can now be operated normally.
NOTICE
Keep the engine speed out of the ta-
chometer high-rpm zone.
If any engine trouble should occur du-
ring the engine break-in period, im-
mediately have a Benelli dealer check
the vehicle.
Parking
When parking, stop the engine, and then re-
move the key from the main switch.
WARNING
Since the engine and exhaust system
can become very hot, park in a place
where pedestrians or children are not
likely to touch them and be burned.
Do not park on a slope or on soft
ground, otherwise the vehicle may
overturn, increasing the risk of a fuel
leak and re.
Do not park near grass or other am-
mable materials which might catch
re.

Table of Contents

Other manuals for Benelli TRK 502

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Benelli TRK 502 and is the answer not in the manual?

Benelli TRK 502 Specifications

General IconGeneral
Displacement500 cc
Transmission6-speed
Fuel Tank Capacity20 liters
Seat Height800 mm
Wet Weight235 kg
Bore x Stroke69 mm x 66.8 mm
Compression Ratio11.5:1
ClutchWet multi-plate
FrameSteel trellis
Wheelbase1505 mm
Ground Clearance190 mm
Max Power47.6 hp (35 kW) @ 8500 rpm
Max Torque46 Nm @ 6000 rpm
Front Suspension50 mm upside-down fork
Front BrakeDouble floating discs, 320mm, 4-piston calipers
Rear BrakeSingle 260 mm disc
Fuel SystemElectronic Fuel Injection (EFI)
ABSDual-channel ABS
Front Tire120/70 R17
Rear Tire160/60 R17
Engine TypeLiquid-cooled, four-stroke, parallel twin cylinder, DOHC, 4 valves per cylinder

Related product manuals