Benelli TRK 502 User Manual

EN
6
Periodic maintenance and adjustment
6 - 3
General maintenance and lubrication chart
III
I
I
I
I
R R R
I I I I
I
I
I I I I
I
I I I
I
R
I
I I
I
I
I
I I I
I
I
I
I R
I
I
III
R R
I I R
I
R R
R
R
I R
I I I
NO. Part
Maintenance
intervention
or control
0 Km
(0 mi)
Pre-delivery
1000 Km
(621mi)
1°
service
4000 Km
(2.486 mi)
2°
service
7000 Km
(4.350 mi)
3°
service
10.000 Km
(6.214 mi)
4°
service
13.000 Km
(8.078mi)
5°
service
Annual
inspection
1 Engine oil
Top up/Replacement
Check Every 500 km (310 mi)
2 Oil ilter Replacement
3 ◙ Fuel ilter Check/Replacement
4 ◙ Air Filter Check/Replacement
5 ◙
Cooling Fluid
Check/Top up/Replacement
Replace Every 2 years or 13,000 km (8,078 mi)
6 ◙
Cooling
system
Check the level of the coolant
and make sure there are no
leaks from the vehicle
7 ◙ Spark plugs Check/Replacement
Check the conditions, clean and restore the distance between electrodes
8 ◙
Transmission
Chain
Check chain tension Make
sure that the rear wheel is
correctly aligned Clean and
lubricate
Every 500 km and after every wash or if the motorcycle has been used in the rain.
9 ◙
Crown
Check//Lubricate
Replace every time the chain is replaced
10 ◙
Pinion/Retaining
washer
Check/Replacement
Replace every time the chain is replaced
11 ◙
Fuel circuit
hoses
Check for faults/leaks
In any case, replace every 3 years

Benelli TRK 502 Specifications

General

Displacement	500 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Seat Height	800 mm
Wet Weight	235 kg
Bore x Stroke	69 mm x 66.8 mm
Compression Ratio	11.5:1
Clutch	Wet multi-plate
Frame	Steel trellis
Wheelbase	1505 mm
Ground Clearance	190 mm
Max Power	47.6 hp (35 kW) @ 8500 rpm
Max Torque	46 Nm @ 6000 rpm
Front Suspension	50 mm upside-down fork
Front Brake	Double floating discs, 320mm, 4-piston calipers
Rear Brake	Single 260 mm disc
Fuel System	Electronic Fuel Injection (EFI)
ABS	Dual-channel ABS
Front Tire	120/70 R17
Rear Tire	160/60 R17
Engine Type	Liquid-cooled, four-stroke, parallel twin cylinder, DOHC, 4 valves per cylinder