Benelli TRK 502 User Manual

EN
10
Regular maintenance coupons
10 - 3
COUPON N. 3 - ....................
Dealer’s stamp
SERVICE CARRIED OUT USING REMOTE MEANS
Responsibility of the dealer
The service was continued to full satisfaction.
Firma
Model/Cubic capacity
Frame number, in full
Km travelled
Responsibility of the dealer
The vehicle has been inspected, following all of the operations envisaged in the
maintenance plan.
Signature
Date
OK
This service involves (C= Checks / S= Replacement)
□ Rear shock absorber
□ Spark plugs
□ Transmission chain
□ Side stand
□ Fuel circuit
□ Wheel bearings
□ Steering bearings
□ Air Filter
□ Oil ilter
□ Rear brake
□ Front brake
□ Valve clearance
□ Brake luid
□ Cooling Fluid
□ Lights, signals and switches
□ Accelerator dial
□ Exhaust and discharge
□ Swingarm oil
□ Engine oil:
□ Tyres
□ Bolt tightness
□ Fuel pipes
□ System ABS

Benelli TRK 502 Specifications

General

Displacement	500 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Seat Height	800 mm
Wet Weight	235 kg
Bore x Stroke	69 mm x 66.8 mm
Compression Ratio	11.5:1
Clutch	Wet multi-plate
Frame	Steel trellis
Wheelbase	1505 mm
Ground Clearance	190 mm
Max Power	47.6 hp (35 kW) @ 8500 rpm
Max Torque	46 Nm @ 6000 rpm
Front Suspension	50 mm upside-down fork
Front Brake	Double floating discs, 320mm, 4-piston calipers
Rear Brake	Single 260 mm disc
Fuel System	Electronic Fuel Injection (EFI)
ABS	Dual-channel ABS
Front Tire	120/70 R17
Rear Tire	160/60 R17
Engine Type	Liquid-cooled, four-stroke, parallel twin cylinder, DOHC, 4 valves per cylinder