BenQ MP611 - External Message Indicator

40
Freeze YES YES YES
Blank YES YES YES
Lamp Reset YES YES YES
OSD Timer YES YES YES
Source Scan YES YES YES
Keystone Hold YES YES YES
Mirror Hold YES YES YES
Blank Time YES YES YES
Information YES YES YES
Reset YES YES YES
External Message indicator (Detailed description refer to SW Specification)
Message Occasion
PC/Composite Video /S-Video /Analog YPbPr
Searching
The system does not detect the signal
Out of range The signal is over the specification
Lamp Warning! The Power Will Turn Off After 4000
Hours
Lamp Hour is over 3000 hours
Change The Lamp! The Power Will Turn Off After
4000 Hours
Lamp Hour is over 3950 hours
Change The Lamp! Lamp Hour is over 4000 hours.